i have a qualstar library with the drives attached to a linux host, F720, F87 and F85 filers.
the scsi number is set on the library. each drive slot has a different number. when the filer sees it (verify with sysconfig -t) the scsi number assigned to the drive on the scsi bus will be the one on library.
for example, i have an F720 with two drives daisy chained to it. they are in the last two slots of the library and show up as drives 0b.8 and 0b.9 on the filer.
-- email: lance_bailey@pmc-sierra.com box: Lance R. Bailey, sr unix Admin vox: +1 604 415 6646 PMC-Sierra, Inc fax: +1 604 415 6151 105-8555 Baxter Place http://www.lydia.org/~zaphod Burnaby BC, V5A 4V7 "In order to keep a true perspective of one's importance, everyone should have a dog that will worship him and a cat that will ignore him." -- Dereke Bruce, Taipei, Taiwan
On Thu, Apr 14, 2005 at 06:50:59PM -0600, Alan Sparks wrote:
Possibly a weird question, but...
I need to connect a Qualstore library to my toasters (760 filers) by daisy-chaining them to the library. Just don't have the ports on the library to direct connect to the drives. But unless I really misunderstand, these filers will all have the same SCSI IDs, so there's gonna be a conflict.
I need to let my NetBackup server control everything, and run NDMP on the filers to do the backups.
Is there any way to retarget the SCSI ports built into the Netapp head to be on an ID of my choosing, so I can sidestep the ID conflict?
Thanks in advance. -Alan
-- Alan Sparks, UNIX/Linux Systems Integration and Administration asparks@doublesparks.net