Going to plain 6.3 or 6.4 or higher would work . Ontap properly recognizes Windows 2000 domain (FQDN) when running cifs setup Regards Rahul ************************ Rahul Kumar Development Operations Group, UGS PLM Solutions Pune, India Email: Rahul.Kumar@ugsplm.com Tele: +91 20 22930812 / 900 Fax: +91 20 22933679 Cell: +91 20 33150979
-----Original Message----- From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Stephane Bentebba Sent: Monday, January 19, 2004 2:57 PM To: toasters@mathworks.com Subject: Re: CIFS Domain Access problem
i heard about cifs buf in 6.1.X ontapp version you could try to upgrade the filer in 633 if possible and make another try
Blake Folgner wrote:
Hello,
One of my customer's filers running 6.1.2 is having problems connecting to the proper NT domain. When I run CIFS setup and try to have it logon to his domain TILEANDMARBLE it try's to connect in NT4 mode and not AD. But if I just use the name LAN it will connect to the
domain with no problem. His domain is named lan.tileandmarble.com so I'm guessing that the filer is recognizing that and not the NETBIOS name TILEANDMARBLE. When I join the filer to the LAN domain it is not viable under my network places since it's joined to the LAN domain and
not TILEANDMARBLE. Is their any way around this problem?
Thanks for your time and help.
Blake