console cable for the netapp is cross serial cable (null modem) lots of other serial cable are not cross (ie normal or straight cable) you could use a changer to make your straight cable turn in a cross one
if you look for pin map, try google and type "connector pin" and so
DFinn@studentadvantage.com wrote:
That's strange. I tried one of those and it didn't work. It's a black rj45->db9 connector labeled TERMINAL and it's the one I was using to attach to the serial port of a laptop to console into the cisco. I know the console port on the netapp works fine though because I can get into that with a serial cable and a laptop.
-----Original Message----- From: Jason.Santos@pinnaclewest.com To: DFinn@studentadvantage.com Sent: 5/19/03 1:52 PM Subject: RE: sem-OT : rj45->db9 pin-out to connect to netapps console port
They are pinned out the same as the adapters that came with the 2511 (labeled Terminal, I think). I have some at home, don't have one here, I can e-mail you later if you still didn't find it.