Exchange is set up not to be an open relay. You need to add your system's IP address to the Exchange server you are using to allow the SMTP messages to go through.
AC
From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Daniel Keisling Sent: Tuesday, February 12, 2008 14:08 To: Kenneth Heal; toasters@mathworks.com Subject: RE: Autosupport failing to mailhost
Does the autosupport.support.transport option only use smtp or https when delivering to NetApp? In this case (https), it works fine. NetApp is receiving my autosupports.
What's not working is local mail to me. I tried this on another filer at another site (except for the mailhost (another Exchange 2003 server), all the autosupport settings are the same) and the email to my local account came immediately, as well as a notification from NetApp. The log even said:
Feb 12 14:11:57 EST [wilstore2a: asup.smtp.sent:notice]: Cluster Notification mail sent: Cluster Notification from wilstore2a (USER_TRIGGERED (testing_from_wilstore)) INFO
This was definitely sent via smtp, yet the autosupport.support.transport is set to https.
Daniel
________________________________
From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Kenneth Heal Sent: Tuesday, February 12, 2008 12:33 PM To: Daniel Keisling; toasters@mathworks.com Subject: RE: Autosupport failing to mailhost
Hi Daniel
I see a line which says autosupport.support.transport https
Which means the filer will use https to send autosupports, and not smtp.
Can you try options autosupport.support.transport smtp
And see if the mails go through?
cheers Kenneth
Kenneth Heal Databasement BV The Netherlands
________________________________
Subject: Autosupport failing to mailhost Date: Tue, 12 Feb 2008 10:22:51 -0600 From: daniel.keisling@austin.ppdi.com To: toasters@mathworks.com
Hello,
From what seems out of the blue, Autosupport emails are no longer able to be sent to my mailhost (Exchange 2003 on the same subnet):
"Autosupport cannot connect to host rtpmail01.americas.ppdi.local (Network comm problem) for message: USER_TRIGGERED (TEST)"
This message will be thrown until the message is eventually dropped. My Exchange administrator does not see any connections coming from the filer to send this email. I can ping the mailhost with no problem:
rtpstore2b> ping rtpmail01.americas.ppdi.local rtpmail01.americas.ppdi.local is alive
My routing table:
Destination Gateway Flags Refs Use Interface default 172.20.63.254 UGS 4 222239 e0a 127 localhost UGS 0 22236 lo localhost localhost UH 3 145 lo 172.20.62/23 link#4 UC 0 0 e0a rtpmail01.americ 0:8:2:28:ee:86 UHL 0 11 e0a rtpexchbe01.amer 0:8:2:28:ee:86 UHL 0 0 e0a rtpstore2b 0:a0:98:9:66:53 UHL 0 18112 lo
My autosupport options:
rtpstore2b> options autosupport autosupport.cifs.verbose off autosupport.content complete autosupport.doit DONT autosupport.enable on autosupport.from rtpstore2b at rtp.ppdi.com mailto:rtpstore2b@rtp.ppdi.com autosupport.local.nht_data.enable off autosupport.local.performance_data.enable off autosupport.mailhost rtpmail01.americas.ppdi.local autosupport.minimal.subject.id hostname autosupport.nht_data.enable on autosupport.noteto autosupport.performance_data.enable on autosupport.retry.count 15 (value might be overwritten in takeover) autosupport.retry.interval 4m (value might be overwritten in takeover) autosupport.support.enable on autosupport.support.proxy autosupport.support.to autosupport at netapp.com mailto:autosupport@netapp.com autosupport.support.transport https autosupport.support.url support.netapp.com/asupprod/post/1.0/postAsup autosupport.throttle on autosupport.to storage at wilm.ppdi.com mailto:storage@wilm.ppdi.com
(I've replaced the @'s with 'at')
I have no problems with my SSH session, so I don't know how this could be a network cable/connection problem. Are there any debugging steps I can do? Has anyone seen this before? It has definitely worked in the past. This is DOT 7.2.2 on a FAS3040.
TIA,
Daniel
______________________________________________________________________ This email transmission and any documents, files or previous email messages attached to it may contain information that is confidential or legally privileged. If you are not the intended recipient or a person responsible for delivering this transmission to the intended recipient, you are hereby notified that you must not read this transmission and that any disclosure, copying, printing, distribution or use of this transmission is strictly prohibited. If you have received this transmission in error, please immediately notify the sender by telephone or return email and delete the original transmission and its attachments without reading or saving in any manner.
________________________________
Express yourself instantly with MSN Messenger! MSN Messenger http://clk.atdmt.com/AVE/go/onm00200471ave/direct/01/
______________________________________________________________________ This email transmission and any documents, files or previous email messages attached to it may contain information that is confidential or legally privileged. If you are not the intended recipient or a person responsible for delivering this transmission to the intended recipient, you are hereby notified that you must not read this transmission and that any disclosure, copying, printing, distribution or use of this transmission is strictly prohibited. If you have received this transmission in error, please immediately notify the sender by telephone or return email and delete the original transmission and its attachments without reading or saving in any manner.