I checked in HWU, there's literally no overlap between the disks you can put into a 4486 and the ones in a 212C.
On the other hand, you should be able to use the suggested DS460C. From what I see, all the disks in a DS212C are also supported in the 460C...
And the offset for the extra cost would be, that you can re-use the IOM12 modules...
/Sebastian
On 30.11.2022 15:59, Tim McCarthy wrote:
In any case but even close to supported The disk may be similar but only certain disks are allowed in that shelf and the ones you want to cost over are not those disk. Please stop entertaining this idea especially for a production system. It won’t be trouble waiting to happen
(Any typos are courtesy of Google GBoard!)
--tmac
*From:* Heino Walther hw@beardmann.dk *Sent:* Wednesday, November 30, 2022 8:57:10 AM *To:* Tim McCarthy tmacmd@gmail.com; toasters@teaparty.net toasters@teaparty.net *Subject:* SV: Migration to DS4486 shelf?
As far as I can see on Hardware universe, DS4486 is still supported on 9.12.1 😉
But you are right, if ONTAP wants to control which disks are in which raid groups, it may become an issue… it may make good sense, but when going from an existing setup by moving the disks over will require some planning 😉
Anyway, I think the idea is deal because it looks like only SATA and MSATA is supported in the caddies, and my existing disks are SAS…
/Heino
*Fra: *Tim McCarthy tmacmd@gmail.com *Dato: *onsdag, 30. november 2022 kl. 15.52 *Til: *Heino Walther hw@beardmann.dk, toasters@teaparty.net toasters@teaparty.net *Emne: *Re: Migration to DS4486 shelf?
Do not do it. That shelf is end of support. It won’t work properly on current ONTAP versions
Disk failures are a pain. ONTAP prevents two disks in the same caddy from being in the same raid group. When a disk does fail it has to fail the serving drives in the caddy and you replaced two at a time
(Any typos are courtesy of Google GBoard!)
--tmac
*From:*Toasters toasters-bounces@teaparty.net on behalf of Heino Walther hw@beardmann.dk *Sent:* Wednesday, November 30, 2022 8:21:09 AM *To:* toasters@teaparty.net toasters@teaparty.net *Subject:* Migration to DS4486 shelf?
Hi there
Because of space constraints I am planning to move my 3 pcs. DS212C into a DS4486.
But I have a few questions 😊
My existing disks are X318 (8TB NL-SAS), and I think the caddies for the DS4486 are also SAS, so that should technically fit?
Does the NetApp see 24 or 48 disks from the DS4486? Because I plan to reuse existing disks with aggregates on them…
I can see the DS4486 use special PN as spare disks because the caddy has two disks installed. How does NetApp handle the replacement when one disk of the two dies?
I know the healthy disk is also copied to a spare before you can replace the caddy, but do you then replace both disks, or do you just replace the broken disk of the two?
I also have plans on replacing the IOM6 modules with IOM12 just as you can in the DS4246 shelfs.. any issues with that?
I know this is close if not far beyond what is supported 😉
/Heino
Heino Walther https://www.linkedin.com/in/heinowalther/
Beardmann ApS http://beardmann.dk/
Jellingvej 9 - 7100 Vejle https://goo.gl/maps/xQVPFMHXpXu
D: 7199 9060 M: 2075 7501
Toasters mailing list Toasters@teaparty.net https://www.teaparty.net/mailman/listinfo/toasters