Hi
We have connected a HP (Quantum) DLT8000 to our F85 but I am unable to access it see the error message below ( it is the same one with every device I tried to use ... )
sysconfig -a give the following result for the concerned device
slot 6: SCSI Host Adapter 6 (Qlogic ISP 1080) Ultra2/Wide, Low Voltage Differential Firmware Version 8.09 Clock Rate 100MHz. Bios Version 1.33 11: Tape: Quantum DLT8000 0233 I/O base 0xbf00, size 0x100 memory mapped I/O base 0xfdefe000, size 0x1000
I've tried to use the cloned_tapes file without success
Ontap release is :
NetApp Release 6.1.1R1: Wed Aug 15 17:58:35 PDT 2001
here is the result of the mt -t xxx status command
------------------------------------------------------------------------------------------------------------------------ yfiler> mt -t rst0l status Tue Oct 16 13:41:05 CES [isp_main:error]: hba_error_proc: Unexpected bus free on 6.11 (0x8000 0xf00 0x0). Reset host adapter. Tue Oct 16 13:41:05 CES [scsi.cmd.checkCondition:error]: Device 6.11: Check Condition: CDB 0x1a: Sense Data aborted command - (0xb - 0x4b 0x0 0x0). Tue Oct 16 13:41:06 CES [isp_timeout:warning]: Resetting SCSI adapter 6 (ha #0) Tue Oct 16 13:41:06 CES [isp_timeout:warning]: Resetting SCSI bus 6 (ha #0) to clear outstanding I/O. Tue Oct 16 13:41:12 CES [isp_main:error]: hba_error_proc: Unexpected bus free on 6.11 (0x8000 0xf00 0x0). Reset host adapter. Tape drive: Quantum DLT8000 Status: ready, write enabled Format: 85937 bpi 35 GB fileno = 0 blockno = 0 resid = 0 yfiler> yfiler> Tue Oct 16 13:41:12 CES [isp_timeout:warning]: Resetting SCSI adapter 6 (ha #0) Tue Oct 16 13:41:12 CES [isp_timeout:warning]: Resetting SCSI bus 6 (ha #0) to clear outstanding I/O. ------------------------------------------------------------------------------------------------------------------------
Any help welcome ( NetApp newbie )
Thanks.