Not sure, the system configuration guide points to those drives not being supported by FC on the 3040, only LVD SCSI.
-----Original Message----- From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Davies,Matt Sent: Monday, August 13, 2007 3:01 PM To: tmac Cc: toasters@mathworks.com Subject: RE: Fibre Channel tape Connections
We have the quad port card on the 3040 and the tape library is connected port D
They are setup as Initiator
No masking that we are aware of.
The library is a adic scalar 100 with SDLT 320 drives, the firmware is not current, but this unit worked fine on the FAS270 cluster without any problems, both the FAS270 and the new 3040 are both running 7.22
Its not officaially supported, but the same type of library works on our DR site.
Sysconfig -t doesn't show any tape drives.
Thanks
Matt
-----Original Message----- From: tmac [mailto:tmacmd@gmail.com] Sent: 13 August 2007 21:50 To: Davies,Matt Cc: toasters@mathworks.com Subject: Re: Fibre Channel tape Connections
what are you plugging the tapes to? Are the FC ports configured for Initiator or target mode?
Did someone setup any type of masking on the Tape Library?
What type of Library is it? What kind of tape drives? Is the firmware current? is the firmware current on the tape Drives? Are the tape drives supported on the FAS3040 heads?
On 8/13/07, Davies,Matt MDAVIES@generalatlantic.com wrote:
Hello all,
Please accept my apologies if I appear stupid, but Fibre Channel is
not
something I know a lot about.
Previously we had a clustered FAS270, each head had 1 FC tape connection, with each one connecting back to a single ADIC tape
library.
At the weekend this was upgraded to a 3040 cluster, and now neither of
the 3040 heads see the tape library. Both heads again are connected directly to the tape library as they were with the 270's. There are no
fibre channel switches involved.
It would be of great help if anyone could point me in the right direction in troubleshooting this. As NetApp don't appear to be of
great
help.
Thanks
Matt
This e-mail (including all attachments) is confidential and may be
privileged.
It is for the exclusive use of the addressee only. If you are not the
addressee,
you are hereby notified that any dissemination of this communication
is strictly
prohibited. If you have received this communication in error, please
erase all
copies of the message and its attachments and notify us immediately at
help@generalatlantic.com mailto:help@generalatlantic.com. Thank You.
-- --tmac
RedHat Certified Engineer