Have you checked the alignment of the VMDK's?
Jack Sent from my Verizon Wireless BlackBerry
-----Original Message----- From: Peta Thames petathames@gmail.com Sender: toasters-bounces@teaparty.net Date: Thu, 26 Apr 2012 14:49:43 To: Toasters@teaparty.net Subject: Reallocation and VMware
Hi all,
I'd like to pick your collective brains about your experiences with reallocate, specifically when reallocating luns under VMware.
For background, we're running ONTAP 8.0.1 on a 3170 that's over three years old. I've been going through measuring reallocation, and most of the volumes are over 3. We have no snapshots, and only a relatively small number of volumes are de-duplicated. All our volumes and luns are thin-provisioned, and no aggregate is more than 76% full (most are ~65%). We regularly have huge latency spikes (worst I've seen so far is 5000000ms, and there are far too many to even track over 50000ms daily), and on one filer head, but not its partner, I regularly see disk utilisation go to 100% or more. I'm hoping reallocate will help here.
I have a brief note from a NetApp support person who says "It’s very important that you complete the reallocation in the following order: 1:OS 2:LUN 3: Volume".
I have two questions about this: - is it absolutely necessary to defrag the OS before you reallocate the lun? I'm sure I've run reallocate without defraging the OS and still seen performance improvements. I'm also assuming that this is only relevant to Windows VMs, not Linux (in our case, Red Hat/CentOS) ones. - if you only have one lun per volume, do you still need to run reallocate on both the lun and the volume? If only one, which is preferable?
All advice appreciated.
Thanks, Peta
_______________________________________________ Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters