Or if you don't have a solaris box at all, there is a java version of ndmpcopy available at ftp://ftp.ndmp.org/pub/version.3/contrib/jndmpcopy.tar.gz I used that perviously to move 12gb of data between filers and it worked without a problem.
Dave
"Chitre, Amol" wrote:
Hello Frank, If any of your filers is running Ontap 6.2 or above, then you should be able t o use the 'ndmpcopy' command on the filer itself to make the copy. Ndmpcopy wa s designed specifically for such migrations, so it pretty much will work.
The other ndmpcopy from ndmp.org that Simon mentioned will also work, but you will require to install it on a solaris client machine within your network.
Hope that helps, Amol.
*-----Original Message----- *From: Clawson, Simon [mailto:simon_clawson@mentorg.com] *Sent: Tuesday, November 12, 2002 8:36 AM *To: 'Frank Bonnet'; toasters@mathworks.com *Subject: RE: filer to filer copy
*You can use volcopy I believe. This is how we moved our disk *storage from *SCSI to fibre a while back. Also, ndmp copy, from ndmp.org works well.
*Simon
*-----Original Message----- *From: Frank Bonnet [mailto:bonnetf@bart.esiee.fr] *Sent: 12 November 2002 15:48 *To: toasters@mathworks.com *Subject: filer to filer copy
*Hi
*I want to transfert all users data from a F85 to a F87 *is there some command to "safely" do such transfert *I expect tar from a third remote machine would be very *slow to do the job.
*The two filers are attached to the LAN with a gigabit *fiber link on the same switch.
*THX *-- *Frank Bonnet