I tried that until I was at
statistics show-periodic
and it still threw that error...
On 22.10.2021 13:34, Timothy Naple wrote:
Mike,
I am thinking that maybe the issue is in one of the counter names based on the error you are receiving since it is not saying the command is not recognized.
If you run the command without the counters specified (just 'statistics show-periodic') does that work? If so, there might be something going on with the counter names on that system.
Thank you, Tim
*From:* Toasters toasters-bounces@teaparty.net on behalf of Sebastian Goetze spgoetze@gmail.com *Sent:* Friday, October 22, 2021 4:03 AM *To:* Potocky Miroslav miroslav.potocky@cern.ch; toasters@teaparty.net toasters@teaparty.net; Mike Thompson mike.thompson@gmail.com *Subject:* Re: statistics show-periodic
Just checked on my 9.7p4 sim:
statistics show-periodic in general seems to be broken. Whatever the counters, whether in Adv or Diag mode it can't find the command and gives the exact error Mike mentioned.
I checked Bugs Online and the only Bug that's show-periodic related was https://mysupport.netapp.com/site/bugs-online/product/ONTAP/BURT/1307631 https://mysupport.netapp.com/site/bugs-online/product/ONTAP/BURT/1307631
(Apparently still in 9.7p10 and fixed in p11)
My 2c
Sebastian
On 22.10.2021 08:40, Potocky Miroslav wrote:
Seems to work fine on 9.7P11. Maybe a more recent change?
XXXX::> set -privilege advanced
Warning: These advanced commands are potentially dangerous; use them only when directed to do so by NetApp personnel. Do you want to continue? {y|n}: y
XXXX::*> statistics show-periodic -counter total-recv|total-sent|data-recv|data-sent|cluster-recv|cluster-sent|cluster-busy XXXX: cluster.cluster: 10/22/2021 08:36:25 total total data data cluster cluster cluster recv sent recv sent busy recv sent -------- -------- -------- -------- ------- -------- -------- 2.91GB 4.08GB 735MB 2.09GB 51% 2.19GB 1.99GB 3.19GB 4.79GB 836MB 2.34GB 40% 2.37GB 2.44GB XXXX: cluster.cluster: 10/22/2021 08:36:30 total total data data cluster cluster cluster recv sent recv sent busy recv sent -------- -------- -------- -------- ------- -------- -------- Minimums: 2.91GB 4.08GB 735MB 2.09GB 40% 2.19GB 1.99GB Averages for 2 samples: 3.05GB 4.43GB 786MB 2.22GB 45% 2.28GB 2.22GB Maximums: 3.19GB 4.79GB 836MB 2.34GB 51% 2.37GB 2.44GB
XXXX::*> version NetApp Release 9.7P11: Tue Jan 12 23:00:49 UTC 2021
Regards, MP On 22. 10. 2021 7:48, Mike Thompson wrote:
can't seem to get this to work on a 9.7 box. works fine on 9.3
am I missing something obvious?
pd-san2::*> set -privilege advanced
pd-san2::*> statistics show-periodic -counter total-recv|total-sent|data-recv|data-sent|cluster-recv|cluster-sent|cluster-busy
Error: command failed: entry doesn't exist
pd-san2::*> set -privilege diag
Warning: These diagnostic commands are for use by NetApp personnel only. Do you want to continue? {y|n}: y
pd-san2::*> statistics show-periodic -counter total-recv|total-sent|data-recv|data-sent|cluster-recv|cluster-sent|cluster-busy
Error: command failed: entry doesn't exist
pd-san2::*> version NetApp Release 9.7P13: Thu Apr 15 02:06:46 UTC 2021
Toasters mailing list Toasters@teaparty.net mailto:Toasters@teaparty.net https://www.teaparty.net/mailman/listinfo/toasters https://www.teaparty.net/mailman/listinfo/toasters
Toasters mailing list Toasters@teaparty.net mailto:Toasters@teaparty.net https://www.teaparty.net/mailman/listinfo/toasters https://www.teaparty.net/mailman/listinfo/toasters