The filer will always try to use the smallest disk possible to replace a failed disk. In your case it will grab the 36GB drive. It will only use larger drives if they are the only spares on the system.
Jeff
Sateesh Mucharla <sateesh@ampere.ns To: toasters@mathworks.com c.com> cc: Sent by: Subject: FC Disk Replacement owner-toasters@mat hworks.com
08/27/2001 04:57 PM Please respond to Sateesh Mucharla
Hi All,
I am curious to know what to do in mixed FC environment when a disk fails.
I have 36GB and 72GB disks (all are FC) on a F760. I have volumes with 36GB drives also a seperate volume with 72GB drives. I have one 36GB and one 72GB drive as hot spares.
Now one of my 36GB FC drive is logging errors excessively. I want to replace this disk with a spare one.
I believe, i have to do "disk fail <diskID>" to fail the erring disk so that it can pick up one that is a hot spare.
My question/worry is that i do not want the 72GB disk to be replaced for a 36GB. How can i ensure that only 36GB drive is picked up for a 36GB drive that is
failed.
Thanks and regards.
Sateesh M National Semiconductor Corp.