Thanks for this, I saw that command but I wanted to make sure that was what I needed. The disk is copying now and everything seems normal.
Brent Ellis
Boston University
interi@bu.edu
From: Knight, Graham [mailto:Graham.Knight@netapp.com] Sent: Monday, December 01, 2008 3:01 PM To: Ellis, Brent; toasters@mathworks.com Subject: RE: moving data off of a spare disk.
The disk replace command will do what you need:
filer> disk replace start <disk to be replaced name> <spare disk name>
this will copy the contents of the disk (no rebuild involved) and put the original disk in the spare pool. If a rebuild is currently in progress wait for it to finish before doing the disk replace
Graham
________________________________
From: Ellis, Brent [mailto:interi@bu.edu] Sent: Monday, December 01, 2008 12:03 PM To: toasters@mathworks.com Subject: moving data off of a spare disk.
I have a situation where a disk failed and the rebuild started on the spare from another shelf of disks. The spare was larger than the original failed disk and I need that spare to be available for the aggregate using the larger disks.
How do I force the data off that disk and onto one of the other spare disks? Do I just wait for the rebuild to finish and then fail it?
Brent
Boston University