This was put there for early testers of FlexShare. Those folks were supported by Engineering directly during the testing. I would not recommend using the 7.1 FlexShare code in production as it is not supported at all now that the production FlexShare code is released. So use at your own risk.
-- Adam Fox adamfox@netapp.com
-----Original Message----- From: Filip Sneppe [mailto:filip.sneppe@gmail.com] Sent: Sunday, August 13, 2006 12:04 PM To: Reinoud Reynders Cc: ggwalker@mindspring.com; thelastman@gmail.com; markallen@micron.com; toasters@mathworks.com Subject: Re: Data Ontap 7.2
On 8/13/06, Reinoud Reynders reinoud.reynders@uz.kuleuven.ac.be wrote:
Flexshare is indeed the 'commercial' name of gardrail, availible in
7.2.
It's indeed a great killer ap.
Hi,
Note that the "priority" command is already available from ONTAP 7.1 from "priv set advanced" mode, eg:
na-demo01*> priority show volume Volume Priority Relative Sys Priority Service Priority (vs User) iscsi_luns on High Medium na-demo01*> sysconfig NetApp Release 7.1.1: Sun Jun 25 03:57:55 PDT 2006
I don't know if it is actually already fully supported on 7.1 systems, and if there are any differences between 7.1 and 7.2 flexshare features. (it is enabled on a test system in our environenment)
Regards, Filip