If you are using a CISCO switch, this may be the cause. You have your media type set to auto. Netapp and Cisco do not negotiate well together. My suggestion would be to force the NIC to full duplex and force the port on the switch also. Also, i have never used 0.0.0.0 to specify "default" before. I am also curious as to what LinkNegotiation does?
John Gaines I2
-----Original Message----- From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com]On Behalf Of Mark D Fowle Sent: Thursday, December 16, 1999 6:24 AM To: toasters Cc: Bruce A Seelinger Subject:
Has anyone experienced the following problem - When my F740 reboots it will not come up on line. My work around at the present time is to pull the gigabit cable out of the flier then putting it back on. This seems to "wake-up" the connection. I have not been able to figure our exactly whats going on and our network administrator has looked at the Cisco 5505 on a wsx5403 (a 3 port gigabit) -- Notice the 0.0.0.0 for adding the default, "default" stopped working ---
---------rc file ---------- #Auto-generated by setup Mon Oct 18 07:53:04 EDT 1999 hostname filer1 ifconfig e7 `hostname`-e7 netmask 255.255.255.0 ifconfig e7 mediatype auto `hostname`-e7 netmask 255.255.255.0 timezone US/Eastern route add 0.0.0.0 <our gateway> 1 routed on rc_toggle_basic alttune e3 LinkNegotiation 1 rc_toggle_basic ypset < our dns server> rc_toggle_basic savecore exportfs -av nfs on