If you do the ndmpd status from the console what do you see?
There is a quirk that some of the commands issued in rc actually are "finished" after the rc file has completely run. "ndmpd on" is one of these. If you do ndmpd status from the rc file, it will not show that it is on yet because the action hasn't been taken yet. If you see that ndmpd status shows that it is on from the console, I guess that this is what you are seeing.
Mike Federwisch
From: "Ferdie Mazon" ferdie@san.rr.com To: toasters@mathworks.com Subject: Fw: NDMPD
Sorry for the confusion, here is a copy of the rc file.
#Regenerated by registry Fri May 26 17:19:40 PDT 2000 #Auto-generated by setup Tue May 2 19:06:59 GMT 2000 hostname srglfs3 ifconfig e0 `hostname`-e0 mediatype 100tx-fd netmask 255.255.0.0 ifconfig e3a `hostname`-e3a mediatype 100tx-fd netmask 255.255.0.0 route add default 10.0.0.160 1 routed on options dns.domainname brandes.com options dns.enable on options nis.enable off savecore exportfs -a nfs on options autosupport.enable on ndmpd on ndmpd status