Reverting from 7.2.5 to 7.2.3 was not possible because of changes in WAFL.
I wanted 7.2.4 anyway; after upgrading my lab, I went to get the binaries for the clustered heads and the link for 7.2.4 had been replaced by 7.2.5 -I naively thought 7.2.4 had been pulled from some reason.
On 6/12/08 10:41 AM, "Christopher Mende" Christopher.Mende@peakuptime.com wrote:
You should be able to use the revert_to command in order to get to 7.2.3, but should check w/ support first.
Christopher Mende Sr Solutions Architect Peak UpTime +1 913 523 4263
-----Original Message----- From: Conner, Neil neil@mbari.org Sent: Thursday, June 12, 2008 12:31 To: Pascal Dukers pascal.dukers@asml.com; Toasters toasters@mathworks.com Subject: Re: Another 7.2.5 quota bug
I downgraded to 7.2.4 last night and that solved the problem. It was a real show stopper for me because the only way to quiet the errors was to turn quotas off.
On 6/11/08 11:20 PM, "Pascal Dukers" pascal.dukers@asml.com wrote:
Conner, Neil wrote:
Since upgrading from 7.2.3 to 7.2.5 on a pair of clustered 3020s, the consoles has been overrun with the following errors:
[toaster: quota.softlimit.normal:notice]: Soft file limit returned tonormal for tree 92 on volume vol0
The syslog buffers are getting overrun, messages are getting dropped, and the syslog is ready to fill the root volume.
We don¹t set file quotas at all. Tried stopping and restarting quotas and disabling SNMP all to no avail. Support has no fix for this so they recommended I downrev to 7.2.4. I can¹t revert back to 7.2.3 because something changed in WAFL.
Anyone else seen this?
I have hit exactly the same bug on multiple filers and also don't use (soft) file limits. Hopefully support comes with a workaround in 7.2.5 and/or a patch soon.