Hello,
I buyed a new disk from Seagate and I am trying to make it work on my F760, Ontap 6.4.5, with /etc/disk_fw from now.netapp.com. The disk is a ST373307FC with Seagate firmware, the netapp did not manage to update it.
The filer says :
Mon Oct 18 15:47:15 GMT [disk.dynamicqual.failure.invalidFile:error]: Device qualification information file (/etc/qual_devices) is invalid. Please refer to the qual_devices man page for corrective action. This problem must be corrected within 72 hour(s) to avoid a forced system shutdown. The following disk(s) remain unqualified: 0a.4 [S/N 3HZ72YS500007436FAMW]. Mon Oct 18 15:47:15 GMT [dyn_dev_qual_admin:info]: Firmware is up-to-date on all disk drives
I added a line in /etc/qual_devices : D SEAGATE ST373307FC 0006 512
vol status says : RAID Disk Device HA SHELF BAY CHAN Used (MB/blks) Phys (MB/blks) --------- ------ --------------- ---- -------------- -------------- Spare disks for block or zoned checksum volumes spare 0a.4 0a ? ? FC:A 34000/69632000 62228/127444216
sysconfig says : 4: SEAGATE ST373307FC 0006 34.0GB (143374743 512B/sect)
34.0GB ?! should be 72 !!
Is there a way to flash the disk and make it work well on my filer ?
Thanks
Cédric