You eventy need to pull the enclosure services drives and make the loop unstable.
It is easy to test, but individual circumstances can come into play. That means a test and repro may not be sufficient and the ultimate answer is no support.
-----Original Message----- From: Leeds, Daniel dleeds@edmunds.com To: George, Andrew Andrew.George@anz.com; Fox, Adam; toasters@mathworks.com toasters@mathworks.com Sent: Mon Oct 15 19:41:59 2007 Subject: RE: removing a loop from running filer
i got a suggestion to do a disk remove of all the spares on the loop first and then down the loop interface as well.
i realize this is not supported or recommended but this environment would take hours to bring down and back up and even for the 70 seconds or so it would take to reboot many apps are not graceful and would crash/corrupt because of this.
rock and a hard place, hours of downtime affecting numerous services may be the only safe way to go. sigh.
-- Daniel Leeds Manager, Storage Operations Edmunds, Inc. 1620 26th Street, Suite 400 South Santa Monica, CA 90404
310-309-4999 desk 310-430-0536 cell
-----Original Message----- From: George, Andrew [mailto:Andrew.George@anz.com] Sent: Mon 10/15/2007 4:37 PM To: Fox, Adam; Leeds, Daniel; toasters@mathworks.com Subject: RE: removing a loop from running filer
I've had mixed results and as Adam said, it's not supported. If you absolutely have to I'd do a storage disable adapter before I uncabled (Oh and turn off Autosupport, you'll get a freaky number of cases generated back at NetApp's if you don't)
_____
From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Fox, Adam Sent: Tuesday, 16 October 2007 9:00 AM To: Leeds, Daniel; toasters@mathworks.com Subject: RE: removing a loop from running filer
I don't believe this is an official supported procedure. There are reports that it has worked, but there are others that it has caused crashes. I would wait until you can take a quick downtime before doing this.
-- Adam Fox adamfox@netapp.com
_____
From: Leeds, Daniel [mailto:dleeds@edmunds.com] Sent: Monday, October 15, 2007 4:26 PM To: toasters@mathworks.com Subject: removing a loop from running filer
I have not done this recently so I was hoping someone on the list has. Basically I need to decomission a loop on an existing filer and migrate the shelves to another filer. I need to do this with the original filer live and running no downtime can be incurred.
the aggregate has been destroyed the disks were all zeroed and are now spares i have verified each individual disk resides in the shelfs/loop i need to remove and no data/root disks are in this loop
cluster failover will be disabled during this procedure.
at this point i should be able to remove the optical loop cabling and the filer will complain but otherwise keep on running correct?
thanks for any input in advance
-- Daniel Leeds Manager, Storage Operations Edmunds, Inc. 1620 26th Street, Suite 400 South Santa Monica, CA 90404
310-309-4999 desk 310-430-0536 cell
"This e-mail and any attachments to it (the "Communication") is, unless otherwise stated, confidential, may contain copyright material and is for the use only of the intended recipient. If you receive the Communication in error, please notify the sender immediately by return e-mail, delete the Communication and the return e-mail, and do not read, copy, retransmit or otherwise deal with it. Any views expressed in the Communication are those of the individual sender only, unless expressly stated to be those of Australia and New Zealand Banking Group Limited ABN 11 005 357 522, or any of its related entities including ANZ National Bank Limited (together "ANZ"). ANZ does not accept liability in connection with the integrity of or errors in the Communication, computer virus, data corruption, interference or delay arising from or in respect of the Communication."