We've seen this symptom (painfully slow throughput) when one
side was half duplex and the other was full duplex. Might be
worth checking...
--
Gordon Keegan, M10-10 Phone: (508) 261-4696
Motorola ING Fax: (508) 261-5757
20 Cabot Boulevard
Mansfield, MA 02048 email: lgk011@dma.isg.mot.com
>
> Has anyone experienced problems with the SnapMirror taking an excessively
> long time to complete the transfer. We have two F760's in a cluster
> configuration. The mirror is set to update every 15 minutes. There is not
> that much data that is changing and the total volume is 107Gb with only 1Gb
> used spanning 10 disks. The transfer takes hours for any change to be
> replicated. The 'vol snapmirror status' command shows that it is
> transferring. The network speed is not an issue. Also connected the two
> NetApp's directly to each other with a cross cable. This does not speed it
> up. Any insight?
>