easy.
you could use the spec sheets to figure it out... Get you last electric bill. It should tell you how much you pay per kw/hour. Figure out how many watts you will be using... Figure about 440W per loaded shelf and 220W per head (660W, .660KiloWatts) If I am doing the right math (and I may be waaay off here): .660KW * 24 Hours = 15.84 Kw/day * 30 days = 475.2 KW/month * .10 (10 cents) = 47.52/month
My electric co has peak/off-peak and intermediate that ranges from .08 -> .18 per kw/hour The average is supposed to be .10 per kw/hour.
like I said...I could be waaayyy off here.
On Jan 18, 2008 8:19 AM, Johnson, James A [HDS] James.Johnson8@hdsupply.com wrote:
About how much? $100?
*From:* tmac [mailto:tmacmd@gmail.com] *Sent:* Friday, January 18, 2008 5:16 AM *To:* Johnson, James A [HDS] *Cc:* Toasters *Subject:* Re: NetApp Home Lab
are you ready for a wallop on your electric bill...
I used to stage demo equipment at home. Just running a power hungry netapp over the weeked caused my electric bill to spike...
On Jan 18, 2008 7:21 AM, Johnson, James A [HDS] < James.Johnson8@hdsupply.com> wrote:
I will be purchasing some NetApp equipment (yes the simulator is cheaper) and here is the quote;
F820 = $950.00 FC9 = $170.00/Each 225B 36GB HDD = $135.00/Each 226A 73GB = $190.00/Each
Of course I am going to cheaper route, but just wanted to get some comments on this.
JJ
-- --tmac
RedHat Certified Engineer #804006984323821 (RHEL4) RedHat Certified Engineer #805007643429572 (RHEL5)
Principal Consultant, RABA Technologies