Someone off list suggested I turn off "flow control" and "auto negotiate" on the SX fiber card.
I see "flow control" but not "duplex" type parms.
mlswfsa> ifconfig e10 e10: flags=300043<UP,BROADCAST,RUNNING,TCPCKSUM> mtu 1500 inet 209.41.211.225 netmask 0xffffffc0 broadcast 209.41.211.255 ether 00:60:cf:20:2b:2f (1000fx) mlswfsa> ifconfig usage: ifconfig <interface> [ [ alias | -alias ] <address> ] [ up | down ] [ netmask <mask> ] [ broadcast <address> ] [ mtusize <size> ] [ mediatype <type> ] [ flowcontrol { none | receive | send | full } ] [ trusted | untrusted ] [ wins | -wins ] [ [ partner { <address> | <interface> } ] | [ -partner ] ]
I'm on an older version of OnTap running on an F630 mlswfsa> version NetApp Release 5.3.6R2: Sat Aug 5 09:40:44 PDT 2000
Thanks,
Dan O'Brien, dmobrien@lcsi.net Cell: 614-783-4859 Work: 614-476-8473 Home: 740-927-2178 Pataskala, OH