RE: was there a thread after this ?

No, what I'm saying is : after this thread, I saw one another new thread, which I did not get it

So, just wanted to confirm ..

From: Jeff Cleverley [mailto:jeff.cleverley@avagotech.com] Sent: Thursday, September 12, 2013 11:25 AM To: Uddhav Regmi Cc: tmac; Toasters@teaparty.net Subject: Re: was there a thread after this ?

There has been no update from me. We haven't heard anything back from NetApp and don't have a timetable for anything. If something comes up I'll try to remember to post a reply.

Jeff

On Thu, Sep 12, 2013 at 4:56 AM, Uddhav Regmi <uregmi111@gmail.com mailto:uregmi111@gmail.com > wrote:

Was there a thread after this ?

Just making sure, I'm getting them all..

From: toasters-bounces@teaparty.net mailto:toasters-bounces@teaparty.net [mailto:toasters-bounces@teaparty.net mailto:toasters-bounces@teaparty.net ] On Behalf Of Jeff Cleverley Sent: Tuesday, September 03, 2013 5:29 PM To: tmac Cc: &lt,Toasters@teaparty.net mailto:Toasters@teaparty.net &gt, Subject: Re: Third party LR 10G networking.

It sounds like someone else may be working that already. If they get one approved we may be able to piggy back on that.

Thanks,

Jeff

On Tue, Sep 3, 2013 at 2:04 PM, tmac <tmacmd@gmail.com mailto:tmacmd@gmail.com > wrote:

Ask for a PVR from NetApp. The card with removable optics should support the LRs, NetApp would just needed to support the driver.

On Sep 3, 2013 3:56 PM, "Jeff Cleverley" <jeff.cleverley@avagotech.com mailto:jeff.cleverley@avagotech.com > wrote:

We're looking at having multiple connections per filer going to a switch in each room to remove the switch as a single point of failure. The single mode cabling will most likely be more compatible with 40G and 100G networking in the next few years.

Jeff

On Tue, Sep 3, 2013 at 1:05 PM, tmac <tmacmd@gmail.com mailto:tmacmd@gmail.com > wrote:

Why not use SR optics from the NetApp to the switch (supported by netapp)

And then LR optics between switches?

--tmac

Tim McCarthy

Principal Consultant

Clustered ONTAP Clustered ONTAP

NCDA ID: XK7R3GEKC1QQ2LVD RHCE6 110-107-141 https://www.redhat.com/wapps/training/certification/verify.html?certNumber= 110-107-141&isSearch=False&verify=Verify NCSIE ID: C14QPHE21FR4YWD4

Expires: 08 November 2014 Current until Aug 02, 2016 Expires: 08 November 2014

On Tue, Sep 3, 2013 at 2:57 PM, Jeff Cleverley <jeff.cleverley@avagotech.com mailto:jeff.cleverley@avagotech.com > wrote:

Greetings,

We are looking at upgrading and changing our network architecture. One option would be to use LR GBIC with single mode fibre. This appears to require non-NetApp GBIC which I'm sure makes it unsupported.

Is anyone doing this, and if so, which parts are you using and what issues have you run into?

Thanks,

Jeff