Re: please provide the complete steps for creating new lacp ports..

very good question...Alexander,

earlier we were using only 2 ports, leaving other 2 ports keeping idle, so we are configuring other 2 ports and configuring LACP out of it,,,as of now do not have any plan to use any other vlan id's other than 608, ,which is already functional in the interface group as a0a, so now that same vlan id can be used for the new interface group a0b...? will that create any outage (since i am not getting vlan add..options similar to 7mode)...

Regards Raj,

On Fri, Mar 8, 2019 at 3:54 PM Alexander Griesser AGriesser@anexia-it.com wrote:

Hey,

why do you want to have the same VLAN on two different interface groups?

*Alexander Griesser*

Head of Systems Operations

ANEXIA Internetdienstleistungs GmbH

E-Mail: AGriesser@anexia-it.com

Web: http://www.anexia-it.com

Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt

Geschäftsführer: Alexander Windbichler

Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601

*From:* toasters-bounces@teaparty.net toasters-bounces@teaparty.net *On Behalf Of *Yuvaraja Shivaram *Sent:* Friday, March 8, 2019 11:22 AM *To:* toasters toasters@teaparty.net *Subject:* please provide the complete steps for creating new lacp ports..

Hi All,

Is there any way to add vlan to existing vlan-id, just how we do at 7mode...

curretly we are using 9.4p1 cmode....

below vlan already exists....so now if i want to create a0b for the same vlan id 608, am not getting vlan add here, so..

if i use ,network port vlan create -node cluster-01 -vlan-name a0b-608... is there any outage to this id 608, which is already running in production...?

Network Network

Node VLAN Name Port VLAN ID MAC Address

---

cluster-01

   a0a-608

             a0a     608      xxxx

cluster-02

   a0a-608

             a0a     608     xxxx