I think you can either use a Super Stack cable like with cisco switches or use a port on each switch as uplinks to make the switch pair part of the same Address Space / Segment etc...
-----Original Message----- From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Andreas Pulker Sent: 22 September 2005 16:25 To: toasters@mathworks.com Subject: multi mode vif on two (or more) different switches
Hello
I tried to configure multimode vif's on two different HP ProCurve 3400cl-24G Switches (802.3ad able). I think i have to Cluster the switched, but how???
Thanks in advance andreas
-- Andreas Pulker, Technical Services | IT-Infrastruktur
Bacher Systems EDV GmbH Clemens-Holzmeister-Strasse 4 , A-1100 Wien, Business Park Vienna phone: +43 (1) 60 126-34 | fax: +43 (1) 60 126-4 e-mail: apulker@bacher.at | web: www.bacher.at ------
-------------------------------------------------------------------------------- The information contained herein is confidential and is intended solely for the addressee. Access by any other party is unauthorised without the express written permission of the sender. If you are not the intended recipient, please contact the sender either via the company switchboard on +44 (0)20 7623 8000, or via e-mail return. If you have received this e-mail in error or wish to read our e-mail disclaimer statement and monitoring policy, please refer to http://www.drkw.com/disc/email/ or contact the sender. 3167 --------------------------------------------------------------------------------