Mate you have a ~26TB aggregate that has ~1.8TB spare. Just increase the size of the volume by say 200g and immediately start the volume move. The sooner you do this the better off you will be, even though you are close to the limits already you still have some room to move. Leave it any longer and all that space may get eaten up.
Go go go do it now.
Regards,
Andrew
On 5/11/19, 8:53 am, "toasters-bounces@teaparty.net on behalf of John Stoffel" <toasters-bounces@teaparty.net on behalf of john@stoffel.org> wrote:
Scott> And the underlying aggregate is full too. I guess we relied a Scott> bit too much on thin provisioning and now need to get some Scott> volumes off the full aggregate.
This is what scares me about Thin provisioning, because when it does go south, you're in a world of hurt until you can reduce the load somehow.
Do you have any snapshots on the other volumes you can delete to make space? Or maybe you have to bite the bullet and add more disks to that Aggregate?
Scott> Cluster::> aggr show-space -aggregate-name cluster_03_sata02_8t
Scott> Aggregate : cluster_03_sata02_8t
Scott> Feature Used Used% Scott> -------------------------------- ---------- ------ Scott> Volume Footprints 25.37TB 100% Scott> Aggregate Metadata 809.8MB 0% Scott> Snapshot Reserve 0B 0% Scott> Total Used 25.37TB 100%
Scott> Total Physical Used 24.23TB 96%
Scott>
[Xpanse logo]http://www.xpanse.com.au/ Andrew Werchowiecki Technical Team Lead Andrew.Werchowiecki@xpanse.com.aumailto:Andrew.Werchowiecki@xpanse.com.au www.xpanse.com.auhttp://www.xpanse.com.au Mobile: +61 422 702 339 Office: +61 8 9322 6767 Fax: +61 8 9322 6077 85 Havelock St West Perth WA 6005 Australia [Find out more about the NetApp AFF C190]https://www.netapp.com/us/media/ds-3989.pdf
On Nov 4, 2019, at 12:58 PM, Parisi, Justin Justin.Parisi@netapp.com wrote:
Scott> Vol move takes a snapshot when doing the move; that's how the transfer happens via snapmirror.
Scott> How full is the volume? Scott> ---------------------------------------------------------------------------------------------- Scott> From: Scott Classen sclassen@lbl.gov Scott> Sent: Monday, November 4, 2019 3:55 PM Scott> To: Parisi, Justin Justin.Parisi@netapp.com Scott> Cc: Toasters toasters@teaparty.net Scott> Subject: Re: Volume move.... Working?
Scott> NetApp Security WARNING: This is an external email. Do not click links or open attachments Scott> unless you recognize the sender and know the content is safe.
Scott> This volume has snapshots disabled so I’m not sure what the error is referring to.
Scott> So it looks like the job is running… maybe I just need to be patient? I just haven’t done any Scott> volume moves (other than when moving to a new filer) so am not sure what to expect in terms of Scott> speediness.
Scott> Cluster::> job show -id 11160 Scott> Owning Scott> Job ID Name Vserver Node State Scott> ------ -------------------- ---------- -------------- ---------- Scott> 11160 Volume Move Cluster node-03 Running Scott> Description: Move “bigvol" in Vserver “svm1" to aggregate “cluster_03_sata01_8t"
Scott> S
On Nov 4, 2019, at 12:45 PM, Parisi, Justin Justin.Parisi@netapp.com wrote:
If it couldn't create a snapshot, it's probably not doing a vol move.
What does "event log show" say? Job show?
-----Original Message----- From: toasters-bounces@teaparty.net toasters-bounces@teaparty.net On Behalf Of Scott
Scott> Classen
Sent: Monday, November 4, 2019 3:40 PM To: Toasters toasters@teaparty.net Subject: Volume move.... Working?
NetApp Security WARNING: This is an external email. Do not click links or open attachments
Scott> unless you recognize the sender and know the content is safe.
Hello toasters,
I’m attempting to move a 3TB vol to a new aggregate. The destination aggregate has 100TB
Scott> available space. It’s been preparing to transfer for over 3 hours…. Is this normal?
Cluster::> volume move show -vserver svm1 -volume bigvol
Vserver Name: svm1 Volume Name: bigvol Actual Completion Time: - Bytes Remaining: - Destination Aggregate: cluster_03_sata01_8t Detailed Status: Volume move job preparing transfer Error: Creating Snapshot copy with owner tag: Not enough space for Snapshot tags Estimated Time of Completion: - Managing Node: node-03 Percentage Complete: - Move Phase: replicating Estimated Remaining Duration: - Replication Throughput: - Duration of Move: 03:21:53 Source Aggregate: cluster_03_sata02_8t Start Time of Move: Mon Nov 04 09:10:19 2019 Move State: warning Is Source Volume Encrypted: false Encryption Key ID of Source Volume: Is Destination Volume Encrypted: false Encryption Key ID of Destination Volume:
Should I be concerned about the "Error: Creating Snapshot copy with owner tag: Not enough
Scott> space for Snapshot tags” ?
Is there any way to see if this vol move job is hung or actually doing something?
Thanks, Scott
Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters
Scott> _______________________________________________ Scott> Toasters mailing list Scott> Toasters@teaparty.net Scott> http://www.teaparty.net/mailman/listinfo/toasters
_______________________________________________ Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters
