9 Aug
2002
9 Aug
'02
10:43 p.m.
What manual and what page? Your raid groups are in two separate volumes so the should have no affect on eachother. Now if you had two raid groups in one volume and they were set up like that you would have a major problem with performance because the second raid group would not be striping (1 data and 1 parity if I read you correctly) while the first raid group would strip nicely. C-
On Fri, Aug 09, 2002 at 02:55:45PM -0700, Art Hebert wrote:
I have 7 disks in vol0 in raid group 0 and 2 disks in vol1 in raid group 0.
In the manual it seems to say you can't do this. Will this cause any problems?
thanks
art
--
-----------------------------------------------------------------------------
* | *
* Chris Blackmor _______ | Good judgment comes from *
* Advanced Micro Devices ____ | | experience *
* Phone: (512) 602-1608 /| | | | And a lot of that comes *
* Fax: (512) 602-5155 | |___| | | from *
* Email: chris.blackmor@amd.com |____/ | | bad judgment! *
* | Author Unknown*
-----------------------------------------------------------------------------
* My comments are mine, and mine alone. *
-----------------------------------------------------------------------------