Yet another would be an FC - SCSI bridge for your existing library. Chaparral makes several (they call them storage routers). We've used them with older AIT-2 libraries on NetApp F760's for years with no problems. We just upgraded our F760s to FAS940s and attached an Overland Data Neo 4100 to them. While the 4100 is LTO-2, it utilizes a built-in Chaprral to connect to the world via 2 Gb FC. No problems here either.
The Chaparral's aren't cheap (~$6K), but they work with no problems at all.
Jeff Mery, MCP National Instruments
------------------------------------------------------------------------- "Allow me to extol the virtues of the Net Fairy, and of all the fantastic dorks that make the nice packets go from here to there. Amen." TB - Penny Arcade -------------------------------------------------------------------------
Jeff Bryer bryer@sfu.ca Sent by: owner-toasters@mathworks.com 12/16/2003 10:53 PM
To: Geoff Hardin ghardin@dalsemi.com cc: toasters@mathworks.com Subject: Re: backup question (Summary)
Another option might be to use some sort of encryption on the data so that it can be backed up using your existing backup system. Not sure exactly what would work for your situation though.
On Tue, Dec 16, 2003 at 10:03:00PM -0600, Geoff Hardin wrote:
First, let me say thanks to everyone who responded.
Second, it appears that there are no stand alone FC drives on the market now. There are a couple of drives that have native FC support (LTO-2
and
STK 9xxx), but they are available only as a part of a library configuration.
So in our situation, it looks like we'll just attach the tape drives to the Sun server and back everything up via NFS (hope they don't want CIFS data on the filer!), or they'll have to open the pocket book a bit wider and buy a small autoloader or library.
Thanks again for all the responses!
Geoff Hardin geoff.hardin@dalsemi.com If at first you don't succeed, destroy all evidence that you tried.
-----Original Message----- From: owner-toasters@mathworks.com
[mailto:owner-toasters@mathworks.com]
On Behalf Of Geoff Hardin Sent: Tuesday, December 16, 2003 3:39 PM To: toasters Subject: backup question
I am getting a FAS270c for a small project. The users are
concerned
about the data security and do not want the data to cross the wire to our current backup solution. So, we're limited to a couple of direct attached tape drives on the FAS270 because the amount of data does not
justify a small library. Is there anyone else out there doing this? What did you use? I can't find any stand alone FC (optical) tape drives.
Thanks for the help!
Geoff Hardin geoff.hardin@dalsemi.com If at first you don't succeed, destroy all evidence that you tried.