I don't use clustered mode yet, but have you tried using the volume command? Again, I don't run c-mode yet, still using 7-mode.
Volume offline -vserver vFiler01 -volume Volume01 Volume online -vserver vFiler02 -volume Volume01
From: toasters-bounces@teaparty.net [mailto:toasters-bounces@teaparty.net] On Behalf Of Alexander Griesser Sent: Tuesday, July 29, 2014 8:40 AM To: Borzenkov, Andrey; toasters@teaparty.net Subject: AW: cDOT - Move Volume from vserver to another?
Thanks, Andrey - I'm happy that it's not just me being unable to do that but on the other side I find it strange that a simple operation like that is not possible in cDOT...
I will try my luck with snapmirror and see if that would help me get it going - for NDMP and snapmirror I will definitely have to note the LUN serials in before and restore them manually afterwards before bringing the LUNs offline; the problem with snapmirror or ndmp is just that it's a copy process after all so it takes some time to complete (leaving alone the fact that I would also need the space for that) and I wanted to just quickly change the presenting vFiler for our customer in a short maintenance window - seems that the maintenance window will be a bit longer now :-/
Best,
Alexander Griesser System-Administrator
ANEXIA Internetdienstleistungs GmbH
E-Mail: ag@anexia.atmailto:ag@anexia.at Web: http://www.anexia.athttp://www.anexia.at/
Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt Geschäftsführer: Alexander Windbichler Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601
Von: Borzenkov, Andrey [mailto:andrei.borzenkov@ts.fujitsu.com] Gesendet: Dienstag, 29. Juli 2014 14:23 An: Alexander Griesser; toasters@teaparty.netmailto:toasters@teaparty.net Betreff: RE: cDOT - Move Volume from vserver to another?
No. And if someone knows tricks how to do it - please share!
The only way is to use snapmirror (or ndmpcopy ... although I'm not sure whether external ndmcopy handles LUN correctly, and there is no internal one ...)
From: toasters-bounces@teaparty.netmailto:toasters-bounces@teaparty.net [mailto:toasters-bounces@teaparty.net] On Behalf Of Alexander Griesser Sent: Tuesday, July 29, 2014 4:06 PM To: toasters@teaparty.netmailto:toasters@teaparty.net Subject: cDOT - Move Volume from vserver to another?
Hey there,
is it possible to move a volume from one vserver to another one on the same node and by using the same aggregate? I can find plenty of possibilities to move a volume to a different physical node or aggregate, but not for what I want to do.
node01 -> aggr01 -> vFiler01 -> Volume01 -> LUN01 node01 -> aggr01 -> vFiler02 -> Volume01 -> LUN01
so basically, I want to "dismount" Volume01 from "vFiler01" and mount it on "vFiler02" - is that possible at all?
Best,
Alexander Griesser System-Administrator
ANEXIA Internetdienstleistungs GmbH
E-Mail: ag@anexia.atmailto:ag@anexia.at Web: http://www.anexia.athttp://www.anexia.at/
Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt Geschäftsführer: Alexander Windbichler Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601
--------------------------------------------------------------------- Confidentiality Notice: This e-mail is intended only for the personal and confidential use of the individual to whom it is addressed and may contain information that is privileged, confidential and protected by law. If you are not the intended recipient, you are hereby notified that any use or disclosure of this information is strictly prohibited. If you have received this message in error, please notify the sender immediately by reply e-mail and delete the original message. Your compliance is appreciated. Tue Jul 29 2014 08:48:38 ---------------------------------------------------------------------