You'll want to configure broadcast domains- each of them will come with a gateway and a pre-built failover group.
On Sat, May 23, 2015 at 9:48 AM, Momonth momonth@gmail.com wrote:
Good point, I'm actually running:
na102::> version NetApp Release 8.3P1: Tue Apr 07 16:05:35 PDT 2015
I'll dig into respective 8.3 docs, thanks for the hint!
Cheers,
On Sat, May 23, 2015 at 3:42 PM, Basil basilberntsen@gmail.com wrote:
Assuming you're not using 8.3 which has new logic in place for
networking,
you'd want to create a routing group:
https://library.netapp.com/ecmdocs/ECMP1196907/html/GUID-BA68EFA4-CFEA-468B-...
On Sat, May 23, 2015 at 9:07 AM, Momonth momonth@gmail.com wrote:
Hi All,
I never used e0M on FAS32xx as it was limited to 100Mb, but decided to give a try on FAS8040.
So, I've configured SP via DHCP (10.193.12.0/24), it's up and running and I can login onto it:
na102::> sp show -node na102labnode-1a -instance
Node: na102labnode-1a Type of Device: SP Status: online Is Network Configured: true Public IP Address: 10.193.12.31 MAC Address: 00:a0:98:68:00:18 Firmware Version: 3.1P1 Part Number: unknown Serial Number: unknown Device Revision: Not Applicable Is Firmware Autoupdate Enabled: trueHowever having assigned an IP to e0M (from cluster management interface) doesn't make the e0M "ping-able". Here is my config (the same 10.193.12.0/24 is used):
na102::> network interface show -vserver na102 -lif na102labnode-1a_mgmt1 -instance
Vserver Name: na102 Logical Interface Name: na102labnode-1a_mgmt1 Role: node-mgmt Data Protocol: - Home Node: na102labnode-1a Home Port: e0M Current Node: na102labnode-1a Current Port: e0M Operational Status: up Extended Status: - Is Home: true Network Address: 10.193.12.44 Netmask: 255.255.255.0 Bits in the Netmask: 24 IPv4 Link Local: - Subnet Name: - Administrative Status: up Failover Policy: local-only Firewall Policy: mgmt Auto Revert: trueFully Qualified DNS Zone Name: none DNS Query Listen Enable: false Failover Group Name: Default FCP WWPN: - Address family: ipv4 Comment: - IPspace of LIF: Default
It feels like e0M needs default gateway? How do I set it up then?
Or Am I missing the whole idea here?
Thanks, Vladimir _______________________________________________ Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters