You've got the paths starting from one head, going down the stack of shelves, and then the final cable crossing over to the other head. That's how it is supposed to be cabled. Just need your ACP connections and you're all set.
----- Original Message ----- From: "Chaim Rieger" chaim.rieger@gmail.com To: "Blake Golliher" thelastman@gmail.com Cc: toasters@teaparty.net Sent: Wednesday, November 16, 2011 5:08:18 PM Subject: Re: mpha confusion
Running 732, don't have access to the cluster, physical or cli. Just trying to double check my layout before i ask the local folks to cable her up. On Nov 16, 2011 4:04 PM, "Blake Golliher" < thelastman@gmail.com > wrote:
Are you running 7.3.3 or later? What does sysconfig -a tell you? The top part tells you if it's Multi-Path HA or Mixed-Path.
NetApp Release 8.0.1P4 7-Mode: Sat Apr 2 13:41:25 PDT 2011 ....... System Rev: A2 System Storage Configuration: Multi-Path HA System ACP Connectivity: Full Connectivity ........
-Blake
On Wed, Nov 16, 2011 at 3:27 PM, Chaim Rieger < chaim.rieger@gmail.com > wrote:
assuming i have two loops (id 00-04, and 10-18) 1 4 port sas card (0a-0d)
loop 1 00A connects to 001a 0a 00B connects to 001b 0a ... 04A connects to 001b 0b 04B connects to 001a 0b loop2 10A connects to 001a 0c 10B connects to001b 0c ... 18A connects to 001b 0d 18B connects to 001a 0d
KEY = 00A = Shelf ID 00 Module A 001A = Filer 001a/b 0a = SAS port A
Its been a long three days of no sleep, but this is mpha, correct ?
Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters
_______________________________________________ Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters