We use 'wafl scan reallocate' weekly to reorder our Exchange 5.5 databases. They keep growing, and are over 100GB apiece. The wafl scan reallocate helps our use of SnapManager verifications greatly. We have been known to run it in the middle of the day, but with a big performance hit (as you have seen). Haven't tried it in conjunction with SnapMirror.
Just for grins, we also use 'wafl scan measure_layout' before and after the reallocate to ensure that we've accomplished something. We affectionately refer to the process as 'reshuffling the wafl house'.
HTH,
-john
-----Original Message----- From: Ambrose_Earle@shamrockfoods.com [mailto:Ambrose_Earle@shamrockfoods.com] Sent: Thursday, January 23, 2003 7:28 PM To: toasters@mathworks.com Subject: wafl scan
Does anyone have any (good) experience with the wafl scan commands?
I am testing Snapmirror and used it to mirror 7x34's to 10x34's. Of course, the data was only written to the first seven drives, so I used 'wafl scan reallocate <volume>' and it seemed to improve the layout quite dramatically. Is this a good use of the command? Other than affecting performance, I'm assuming everything is accessible during the run of this command?
Thanks in advance,
This message is for the designated recipient only and may contain privileged or confidential information. If you have received it in error, please notify the sender immediately and delete the original. Any other use of the email by you is prohibited.