26 Feb
2008
26 Feb
'08
5:10 p.m.
Hi,
We're in progress to configure vol autoresizing on some of our systems. One central aspect of this configuration should be to get an information about the processed autoresizing action, to track what's going on on the affected volume. At the moment I see the only possibilty to get the threshold information of neary full and full volumes (by default 95% & 98%). By default, I just see the log on the console and so in /etc/messages, but non is send via snmp etc.
Is it possible to monitor the autoresizing action or is there a way to implement a notfication for autoresizing?
I'm thinking of user defined traps or something like that. Has anyone experiences with implementing vol autoresize?
Cheers Andreas
--
Wincor Nixdorf International GmbH
Sitz der Gesellschaft: Paderborn
Registergericht Paderborn HRB 3507
Gesch�ftsf�hrer: Eckard Heidloff (Vorsitzender), Stefan Auerbach, Dr. J�rgen Wunram
Vorsitzender des Aufsichtsrats: Karl-Heinz Stiller
Steuernummer: 339/5884/0020 - Ust-ID Nr.: DE812927716 - WEEE-Reg.-Nr. DE44477193
Diese E-Mail enth�lt vertrauliche Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrt�mlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese E-Mail. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser E-Mail ist nicht gestattet.
This e-mail may contain confidential information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this e-mail. Any unauthorised copying, disclosure or distribution of the material in this e-mail is strictly forbidden.