Hi,
thanks a lot! My last physik lesson is some time ago... In the meanwhile i got an answer from Netapp and it is that only 50um is supported.
BTW: What was the maximum length of shelf-to-head-cables??
Regards
Jochen
-----Original Message----- From: Nils Vogels [mailto:bacardicoke@gmail.com] Sent: Monday, April 16, 2007 1:11 PM To: Willeke, Jochen Cc: toasters@mathworks.com Subject: Re: 5um or 90um
9um cables are Single Mode cables, and are used to pass a different wavelength of light than the 50 / 62.5 um cables.
It shouldn't work, and if it works, it's possible you cause some damage to the SFP's due to too high light levels.
On 4/16/07, Willeke, Jochen Jochen.Willeke@wincor-nixdorf.com wrote:
Hi toasters,
does anybody know if we can use 9um LC-LC cables to connect a shelf
with
an ESH2 to a filer, or are 50um LC-LC cables the only supported ones?
Because this will be a production system i need to know if it is
covered
from Netapp-support. Sadly i did not find anything about this on NOW.
Best Regards and thanks in advance
Jochen