So, got this data so far:
appears to be using a0a (single mode e0b/e0d, e0b active, e0d not so much with IP distribution) 10.9.9.9:/test1 on /mnt1 type nfs (rw,bg,hard,intr,rsize=32768,wsize=32768,vers=3,tcp,timeo=600,addr=10.9.9.9) --> tried both intr and nointr Confirmed v3 is ENABLED and all v4+ are disabled on the NFS vserver TCP & UDP are both enabled on vserver
No Jumbo frames
No blatant errors showing via netstat -i on the client or netapp side
Flow control appears off from cdot point of view.
have the export-policy rule data
Waiting for this data:
vol show -field policy
Wondering if it might be related.
*--> Iluhes*
Please send: vol show -field policy net int show -vserver test-nfs -instance (would like to see all the network interface details)
Also send the client-side "ifconfig -a" for all interfaces, including netstat -rn
maybe there is a bad route someplace.
--tmac
*Tim McCarthy* *Principal Consultant*
On Mon, Dec 22, 2014 at 3:50 PM, Parisi, Justin Justin.Parisi@netapp.com wrote:
Are you specifying NFSv3 in the mount? Or using NFSv4?
I'd suggest getting the info tmac mentioned. Like others have said, impossible to solve with such limited info.
*From:* Iluhes [mailto:iluhes@yahoo.com] *Sent:* Monday, December 22, 2014 3:49 PM *To:* Parisi, Justin; Alexander Griesser *Cc:* Toasters *Subject:* Re: new cdot NFS vserver. NFS mount point hang on I/O
New clients. RHEL 6.6
On Monday, December 22, 2014 2:43 PM, "Parisi, Justin" < Justin.Parisi@netapp.com> wrote:
How old are your clients?
*From:* toasters-bounces@teaparty.net [ mailto:toasters-bounces@teaparty.net toasters-bounces@teaparty.net] *On Behalf Of *Iluhes *Sent:* Monday, December 22, 2014 3:42 PM *To:* Alexander Griesser *Cc:* Toasters *Subject:* Re: new cdot NFS vserver. NFS mount point hang on I/O
Thanks.
I can get unmounted and remounted, but I cannot overcome the issue of copy any files into filesystem, or writing anything to it. Nothing besides mkdir and touch works..
Something is wrong with the setup...
On Monday, December 22, 2014 2:37 PM, Alexander Griesser ag@anexia.at wrote:
umount -l /mountpoint
should at least get you going on the box again.
When the filesystem had bren mounted on linux, can you post the output of the 'mount' command so we can see the mount options in use?
best,
*Alexander Griesser*
Head of Systems Operations
ANEXIA Internetdienstleistungs GmbH
E-Mail: ag@anexia.at
Web: http://www.anexia.at
Anschrift Hauptsitz Klagenfurt:Feldkirchnerstraße 140, 9020 Klagenfurt
Geschäftsführer: Alexander Windbichler
Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601
Am 22.12.2014 um 21:16 schrieb Iluhes iluhes@yahoo.com:
Yes Jordan, have to do fuser -km actually...but even that works 50% of the time. It will hang the box
On Monday, December 22, 2014 1:51 PM, Jordan Slingerland < Jordan.Slingerland@independenthealth.com> wrote:
Does not solve the root of your problem, but can you umount -f ?
*From:* toasters-bounces@teaparty.net [ mailto:toasters-bounces@teaparty.net toasters-bounces@teaparty.net] *On Behalf Of *Iluhes *Sent:* Monday, December 22, 2014 2:42 PM *To:* Toasters *Subject:* new cdot NFS vserver. NFS mount point hang on I/O
Hi Folks,
New cdot isntall, new NFS vserver. NFS shares can be mounted OK on linnux and solaris clients.
I can mkdir and touch files. Copy or move or DD or any I/O operation completly hangs the mount point, the process cannot be Control-C, and kill -9 does not even help
Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters
Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters