One voice out of the choir :-) Download + revert_to or simply download/reboot?
-----Messaggio originale----- Da: Bob Doho [mailto:bob.doho@gmail.com] Inviato: lunedì 10 dicembre 2007 15.47 A: Milazzo Giacomo Cc: toasters@mathworks.com Oggetto: Re: Data Ontap "downgrade"
Hi Giacomo,
To revert to 7.2.2 you first need to do a "download" en then use the "revert_to 7.2.2" command before rebooting your filer.
On Dec 10, 2007 2:39 PM, Milazzo Giacomo G.Milazzo@sinergy.it wrote:
Hi All
Maybe is a simple question for most of you but I've never done before and I want to be sure J
I'm going to revert a 6030HA from 7.2.3 to 7.2.2 for Snapmirror (bidirectional) compliance to another 6030HA system already running 7.2.2
I've seen times ago a similar operation performed from a 7.2 to a 7.1 and I remember some special command to apply after the unzip/download phase of the preceding Data Ontap release.
Is it so? I mean, there are special commands on cli or should I simply unzip the 7.2.2, living them the "download" command and a reboot as an "upgrade"? Or is there something other.
My 6030HA is a NEW system, no volumes or other aggregate other that the aggr0/vol0 for the os
Regards