without doing research on the error... Looks like you had a parity error on one memory module. Looks like this error was corrected by the ECC stuff. May have to replace dimm j27.
NOTICE - This communication is intended ONLY for the use of the person or entity named above and may contain information that is confidential or legally privileged. If you are not the intended recipient named above or a person responsible for delivering messages or communications to the intended recipient, YOU ARE HEREBY NOTIFIED that any use, distribution, or copying of this communication or any of the information contained in it is strictly prohibited. If you have received this communication in error, please notify us immediately by telephone and then destroy or delete this communication, or return it to us by mail if requested by us. The City of Calgary thanks you for your attention and cooperation.
-----Original Message----- From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Alan Sparks Sent: 2005 Aug 26 10:42 PM To: Toasters List Subject: Memory error
Can someone help me interpret this error message from a 760 filer head? Beyond "it's a memory error," that is... Is this difficult/expensive to fix? Thanks in advance. -Alan
[netapp2: raid_xor_server:CRITICAL]: 1 CORR PROC ERR 86 eia:17295c00 fs:f400 eis:c5000000 isr:100000000 CPU ECC error on DIMM J27 at address=0x17295c0f, bit=31.
-- Alan Sparks, UNIX/Linux Systems Integration and Administration asparks@doublesparks.net