In many cases it is very worthwile to consult the system configuration guides at now: ( http://now.netapp.com/NOW/knowledge/docs/hardware/NetApp/syscfg/scdot722 /index.htm ) The FAS270 and FAS270c do not support expansion adapters. They have the following onboard interfaces:
* Two onboard 10Base-T/100Base-TX/1000Base-T copper interfaces * One internal 10Base-T/100Base-TX/1000Base-T copper interface for communication between the two system modules of a FAS270c * One onboard 1-Gb fibre-channel interface for connection to additional shelves * One onboard 2-Gb optical fibre-channel interface that functions as an initiator for tape-drives or as a FCP target-mode interface
The interface used for tape does not support shelves.
Bye Ernie
________________________________
From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Mark "Z" Zytkovicz Sent: Donnerstag, 14. Juni 2007 13:09 To: toasters@mathworks.com Subject: RE: Tape Directly connected
In the cases where people have done this - are extra DS14 shelves involved? I was told that the only way to get my tape library attached to a 270c with external shelves is with a fiber switch in the middle of it all.
Thanks,
MarkZ
________________________________
From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Jeff Mery Sent: Thursday, June 07, 2007 1:35 PM To: Luis Sanchez R Cc: owner-toasters@mathworks.com; toasters@mathworks.com Subject: Re: Tape Directly connected
Yep. We do this in one of our branch offices. Depending on your backup software, you may even be able to connect just one drive within an existing library.
We have an Overland Data NEO 4000 with 4 x LTO-2 drives in this branch. Two drives go to our Networker server for general system backups. The other two are cabled directly to their FAS270 (no switch). In this situation, media management is handled by the Networker server while the filer is responsible for spinning the data to the tapes.
One thing to watch out for is the ability to mix NDMP backups with other backups. Some software will let you do it, and other software will require that a drive be designated for NDMP only. Ours are dedicated here.
Jeff Mery - MCSE, MCP National Instruments
------------------------------------------------------------------------ - "Allow me to extol the virtues of the Net Fairy, and of all the fantastic dorks that make the nice packets go from here to there. Amen." TB - Penny Arcade ------------------------------------------------------------------------ -
Luis Sanchez R lsanchez@isc.cl Sent by: owner-toasters@mathworks.com
06/07/2007 10:48 AM
To
toasters@mathworks.com
cc
Subject
Tape Directly connected
Hi
I don't have experience with SAN.
My question is:
Can I connect directly a SAN tape with a FAS270c, without the use of a SAN switch between them?
Thanks
Luis