Sounds like maybe you hit this.... http://mysupport.netapp.com/NOW/cgi-bin/bol?Type=Detail&Display=876776
SP firmware upgrade initiated by Data ONTAP can sometimes result in the SP issuing NMI and L2 watchdog reset, resulting in Data ONTAP reboot
When Data ONTAP automatically updates the Service Processor (SP) firmware from most of earlier releases to Data ONTAP 8.3.1, there is a possibility that the SP incorrectly triggers the watchdog and reboots Data ONTAP. This issue might occur on all platforms.
--tmac
*Tim McCarthy, **Principal Consultant*
On Wed, May 11, 2016 at 10:49 AM, Iluhes iluhes@yahoo.com wrote:
8.3
On May 11, 2016, at 9:32 AM, tmac tmacmd@gmail.com wrote:
what version of ONTAP?
--tmac
*Tim McCarthy, **Principal Consultant*
On Wed, May 11, 2016 at 10:30 AM, Iluhes iluhes@yahoo.com wrote:
Only downloading via "get" of sp formware. It is 8040/8020 and it look like it auto upgrade to 3.1.2 from 3.1P1...and it watchdog reset few nodes. Wild, no?
On May 11, 2016, at 8:31 AM, tmac tmacmd@gmail.com wrote:
What platform? what was the original release? did you read the upgrade info?
There were situations, if I recall, that dictated a specific way to upgrade and in some instances, you could not skip release and certain releases are tied to certain releases of ONTAP.
--tmac
*Tim McCarthy, **Principal Consultant*
On Wed, May 11, 2016 at 8:10 AM, Iluhes iluhes@yahoo.com wrote:
Folks, I have situation that SP firmware was upgraded after just "Get" of software system node image get -node * -package http:// and nothing else. It caused the SP to upgrade and watchdog reset some nodes as well. Is there a reason for that? Anyone ever come across this issue.
Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters