You might have to replace the Motherboard.. Hope you have support on this system with Netapp..
-Venkat
-----Original Message----- From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Constantin Bogomolnyi Sent: Thursday, June 09, 2005 4:43 PM To: George, Andrew Cc: Constantin Bogomolnyi; toasters@mathworks.com Subject: Re: A dead f840 ???
Hi,
the console and the lcd shows the same thing , i mean it depend of how loaded it is , if i leave all cards inside and so pci scan takes longer than if there is no card inside to it freeze at the pci scan , if i remove all cards , it jumps until Testing Memory and freeze at this point so its undependant of the boot stage , but dependant on the number of seconds since the power on .
thanks cb
On Fri, Jun 10, 2005 at 09:09:31AM +1000, George, Andrew wrote:
Hook up the console and see what it says? Anything showing on the LED display?
-----Original Message----- From: owner-toasters@mathworks.com
[mailto:owner-toasters@mathworks.com]
On Behalf Of Constantin Bogomolnyi Sent: Friday, 10 June 2005 8:44 AM To: toasters@mathworks.com Subject: A dead f840 ???
Hi,
i just tried to power up an f840 , it freeze approx 45 sec after the powerup , i tried to remove all cards , and replugged the ram but it still freeze exactly after 45 sec .
it look like some "timer" freeze it after N sec .
maybe the watchdog ??
any ideas ?
thanks cb