Hi G,
To get SRM information from DFM about files kept on a filer, you put the host agent on a system that is mounting the filesystem(s) from the filer that you are interested in (do the corresponding thing for the CIFS share case).
Jay Perry
-----Original Message----- From: Sto Rage(c) [mailto:Net_Backer@hotmail.com] Sent: Thursday, July 15, 2004 3:03 PM To: markallen@micron.com; paul.brubaker@attws.com; toasters@mathworks.com Subject: Re: DFM database transfer
Talking about DFM and its SRM component. Have you guys setup SRM for the filers? Is there an agent for the filers? If not how does one use an host agent to walk a filer's tree? thanks -G
----- Original Message ----- From: markallen@micron.com To: paul.brubaker@attws.com ; toasters@mathworks.com Sent: Thursday, July 15, 2004 1:37 PM Subject: RE: DFM database transfer
I haven't had any problems with doing this. I've done it two or three different times. The only thing that I had problems with is the SRM data. I had to delete my paths and re-add them once I was running on the new system. The database was crashing while I was walking a device tree so I deleted the SRM path and re-entered it. I haven't had any problems since then.
-Mark -----Original Message----- From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com]On Behalf Of Brubaker, Paul Sent: Thursday, July 15, 2004 12:58 PM To: toasters@mathworks.com Subject: DFM database transfer
Question on installing DFM 3.0. We have a current working install of DFM on "server A". Just built a new "server B" and installed DFM 3.0. We want to preserve and use the db from serverA on serverB. How do we accomplish this? Just run the dfm backup create (on serverA); then run the dfm backup restore (on serverB). Is that it? Anyone have experience with this?
thanks!
Paul M. Brubaker, Jr. RIDS - Intel System Support AT&T Wireless - Harrisburg PA e-mail: paul.brubaker@attws.com office #: 717-526-5011 cell #: 717-578-2254