RE: NDMP speed measured in the field

Hi,

FAS3050, single aggregate (72 x 15K, RAID-DP, 16 disks per raid group), NetWorker with DSA (i.e. data stream goes via LAN), approximately 40MB/s.

Should add that wafl scan report fragmentation ratio of 14; is always important to mention when we speak about backups.

С уважением / With best regards / Mit freundlichen Grüβen

--- Andrey Borzenkov Senior system engineer

________________________________ From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Van Eyken Michiel Sent: Wednesday, August 20, 2008 11:11 AM To: toasters@mathworks.com Subject: NDMP speed measured in the field

All,

Just curious if the people here in this distribution list who are using NDMP backups can give me their NetApp config (filer type & number of disks) and their actual backup throughput.

If it’s possible also the number and drive types connected and used backup software.

Thanks in advance

With kindest regards,

[cid:image001.gif@01C902BC.AEA7F5C0]http://www.uptime.be email-disclaimerhttp://www.uptime.be/disclaimer.html

"Computers are like air conditioners - They stop working properly when you open Windows"