But you don't need that to just go from 7.2.3 to 7.2.2.
Simply download and reboot will do it.
Davin.
At 15:20, on Dec 10, 2007, "Nils Vogels" wrote:
Hi Milazzo,
The command you are looking for is revert_to, which downgrades WAFL.
It's part of the upgrade guide, you should be able to find tons of info there.
Kind regards,
Nils
On Dec 10, 2007 2:39 PM, Milazzo Giacomo G.Milazzo@sinergy.it wrote:
Hi All
Maybe is a simple question for most of you but I've never done before and I want to be sure J
I'm going to revert a 6030HA from 7.2.3 to 7.2.2 for Snapmirror (bidirectional) compliance to another 6030HA system already running 7.2.2
I've seen times ago a similar operation performed from a 7.2 to a 7.1 and I remember some special command to apply after the unzip/download phase of the preceding Data Ontap release.
Is it so? I mean, there are special commands on cli or should I simply unzip the 7.2.2, living them the "download" command and a reboot as an "upgrade"? Or is there something other.
My 6030HA is a NEW system, no volumes or other aggregate other that the aggr0/vol0 for the os