Hello Mike,
perhaps I wasn't clear. I am familiar with the MIB file available at now.netapp.com. But I didn't find the OIDs to monitor the "cache age" and "disk read/write kb/s" variables (like the ones reported using the sysstat command).
I also couldn't find them at the traps.dat file that you suggested.
I was wondering if anyone here is monitoring this kind of info.
Perhaps if it's not in those files, it's not possible to monitor them...?
Thanks, _______________________________________________ Henrique Pantarotto SysOp Site São Paulo Terra Networks Brasil S/A A Internet mais sua do que nunca Tel: (11) 5505-5728 r.316/238 ICQ: 6934285 IT: henpa henrique@corp.terra.com.br
-----Original Message----- From: Mike Smith [mailto:mikesmit@netapp.com] Sent: Tuesday, July 25, 2000 7:29 PM To: Henrique Pantarotto Cc: toasters@mathworks.com Subject: Re: Monitoring other stuff with MRTG
If you download the latest MIB from the netapp now site (http://now.netapp.com) and unzip/untar it you will find a traps.dat file which has a list of all the snmp oid's and their names/function. --
Mike Smith mikesmit@netapp.com http://now.netapp.com 408-822-4755 Escalations EngineerHello Toaster friends,
I am already monitoring my filers for these infos:
- CPU utilization
- NFS ops/seg
- /vol/vol0 volume
- ethernet traffic
I was wondering if its possible to also monitor:
- Cache age (as reported by sysstat command)
- Disk kB/s read and write (also reported by sysstat)
Any know know the SNMP OID to this? I tried searching at the MIB, but I couldn't find it.
Thanks, _______________________________________________ Henrique Pantarotto SysOp Site São Paulo Terra Networks Brasil S/A A Internet mais sua do que nunca Tel: (11) 5505-5728 r.316/238 ICQ: 6934285 IT: henpa henrique@corp.terra.com.br