The Peribit compression boxes are excellent. We use them extensively.
-----Original Message----- From: atticus@satanic.org [mailto:atticus@satanic.org] Sent: Thursday, 13 May 2004 5:16 AM To: Holland, William L Cc: 'toasters@mathworks.com' Subject: Re: TCP/IP Compression
We have need to use SnapMirror over a WAN, currently T-1. Any suggestions on TCP/IP compression products to help minimize the amount of WAN
bandwidth
needed?
If you own both ends and its Cisco gear, check out AIM-COMPR's -- they'll compress at the PPP/HDLC level minimal impact on latency and without putting another device in-line. The AIM-COMPR2 for the original 2600 series will do 8mb/s and you can pick up a pair for <$500 on ebay.
************** IMPORTANT MESSAGE ************** This e-mail message is intended only for the addressee(s) and contains information which may be confidential. If you are not the intended recipient please advise the sender by return email, do not use or disclose the contents, and delete the message and any attachments from your system. Unless specifically indicated, this email does not constitute formal advice or commitment by the sender or the Commonwealth Bank of Australia (ABN 48 123 123 124) or its subsidiaries. We can be contacted through our web site: www.commbank.com.au **************************************************