1 Jan
2001
1 Jan
'01
12:45 a.m.
mikesmit> Based upon the description there is no way to tell exactly what the mikesmit> problem is. First off if you are using 10baseT then the 2M transfer mikesmit> will take 2 seconds. If you are using 100baseT (full duplex) then it mikesmit> will take 0.2 seconds.
The filer is set at 100tx-fd:
slot 0: Ethernet Controller e0 MAC Address: 00:a0:98:00:9d:fd (100tx-fd-up)
I don't have access to the switch, so that's something to check on. We'll also be moving to GigE, so if this is the issue, then that may inadvertently solve the problem.
Thanks for the pointer.