Skip,
Send us the filer output from this command (I find rsh/ssh the best for this);
Options autosupport
I am guessing you are trying to use the http/https for ASUPs, but I won't be sure until you send me that output.
Also paste us a few lines from the /vol/vol0/etc/messages (\<filer>\etc$\messages) file that concern these failed ASUPs.
You seem to be logging into FilerView ok, so I am assuming there is no http authentication problems there.
Thanks,
Aaron
_____
From: SKIP HOFMANN [mailto:SKIP.HOFMANN@ttisg.com] Sent: Saturday, 24 July 2004 3:57 AM To: ''toasters@mathworks.com' ' Subject: Auto Support option
Hi all
I'm trying to setup and use auto support on my R200. When I check in the syslogs on the filler I get a "[asup.post.badUrl:warning] javascript:popEMS('asup.post.badUrl'); :" I'm using the Web interface to try and configure this. What am I missing here?
Thanks for any help
************** IMPORTANT MESSAGE ************** This e-mail message is intended only for the addressee(s) and contains information which may be confidential. If you are not the intended recipient please advise the sender by return email, do not use or disclose the contents, and delete the message and any attachments from your system. Unless specifically indicated, this email does not constitute formal advice or commitment by the sender or the Commonwealth Bank of Australia (ABN 48 123 123 124) or its subsidiaries. We can be contacted through our web site: commbank.com.au **************************************************