All negotiation is off (both filer and switch) - We did think of that first though.
Mark Fowle Caterpillar/BCP
anders.s.ljungberg@edt.ericsson.se on 12/16/99 08:11:00 AM
To: Fowle_Mark_D@cat.com@INTERNET cc: (bcc: Mark D. Fowle/0V/Caterpillar) Subject: RE: Retain Until: 01/15/2000 Retention Category: G90 - Information and Reports
Hi!
Turn all negotiation off. ( filer and switch ( the switch has two types negotiation, flow control and negotiation, type "show neg" on the switch).
On the filer use 1000fx ( or whatever media )
e5: flags=300043<UP,BROADCAST,RUNNING,TCPCKSUM,IPHDRCKSUM> mtu 1500 inet 147.214.9.21 netmask 0xffffff00 broadcast 147.214.9.255 ether 00:60:cf:20:18:3a (1000fx)<-----
Godd luck Anders Ljungberg
-----Original Message----- From: Mark D Fowle [mailto:Fowle_Mark_D@CAT.com] Sent: Thursday, December 16, 1999 1:24 PM To: toasters Cc: Bruce A Seelinger Subject:
Has anyone experienced the following problem - When my F740 reboots it will not come up on line. My work around at the present time is to pull the gigabit cable out of the flier then putting it back on. This seems to "wake-up" the connection. I have not been able to figure our exactly whats going on and our network administrator has looked at the Cisco 5505 on a wsx5403 (a 3 port gigabit) -- Notice the 0.0.0.0 for adding the default, "default" stopped working ---
---------rc file ---------- #Auto-generated by setup Mon Oct 18 07:53:04 EDT 1999 hostname filer1 ifconfig e7 `hostname`-e7 netmask 255.255.255.0 ifconfig e7 mediatype auto `hostname`-e7 netmask 255.255.255.0 timezone US/Eastern route add 0.0.0.0 <our gateway> 1 routed on rc_toggle_basic alttune e3 LinkNegotiation 1 rc_toggle_basic ypset < our dns server> rc_toggle_basic savecore exportfs -av nfs on