Greetings:
I have a routing problem on a 2.6 box, here is the detail.
I want to send traffic out to 10.16.118.20 on qfe0, which will be a private 10/100 segment to the NetApp for NFS traffic. I am only using 10.16.118.0 in this message, because 119.0 does the same thing on qfe1.
This is a prototype box to configure and test first, then deploy to the field installed Solaris machines.
The network is like this:
NETAPP-F760:e0 public interface connected to 3/1 on a Cat 5505 Switch, on VLAN 223 (public addressed traffic) NETAPP-F760:ech1 channel of e1a and e1b on 10.16.118.0 on 5/1-2 (channel) on VLAN 118 - 10.16.118.10 NETAPP-F760:ech2 channel of e1c and e1d on 10.16.119.0 on 5/3-4 (channel) on VLAN 119 - 10.16.119.10
On the sun box I have:
Sun:e0 public interface connected to 3/2 on Cat 5505 on VLAN 223 Sun:qfe0 10.16.118.23 connected to 3/15 on Cat 5505 on VLAN 118 Sun:qfe1 10.16.119.23 connected to 3/16 on Cat 5505 on VLAN 119 Sun:qfe2 10.16.254.23 not yet connected for ADSM traffic Sun:qfe3 10.16.3.117 connected to management LAN
The interface is up, here is netstat output:
Routing Table: Destination Gateway Flags Ref Use Interface -------------------- -------------------- ----- ----- ------ --------- 151.142.223.0 151.142.223.53 U 2 282 hme0 10.16.118.0 10.16.118.23 U 2 5351 qfe0 10.16.119.0 10.16.119.23 U 2 0 qfe1 10.16.3.0 10.16.3.117 U 2 3 qfe3 default 151.142.223.1 UG 0 129 127.0.0.1 127.0.0.1 UH 0 4 lo0
A traceroute to 10.16.118.10 shows the machine choosing hme0 for a route...why?
# traceroute 10.16.118.10 traceroute: Warning: ckecksums disabled traceroute: Warning: Multiple interfaces found; using 151.142.223.53 @ hme0
I have an NFS mount on the Sun box to the filer using the 10.16.118.10 address, and it even shows up as the propler hostname:/<path> in the 'df' output.
I can blow large amounts of dd traffic to/from the mount, and I see NO traffic on the correct Channel (ech1) on the Filer.