Pretty much as you think. V-Series work exactly like a FAS system except there are other disks on the back-end. The only difference you will notice is that aggregates created on 3rd party disks will not have any RAID turned on from the filer side as we will rely on the back-end array to handle disk failures. In theory, the V-Series should never see a drive go away.
The LUNs provisioned to the V-Series look like disks to the controller. Starting in 7.3, you can also hook up NetApp shelves at the same time.
But all of the software features work just like a FAS. Once you create the aggregates, it looks, feels, and acts just like a FAS.
-- Adam Fox
Systems Engineer
adamfox@netapp.com
From: Page, Jeremy [mailto:jeremy.page@gilbarco.com] Sent: Tuesday, April 06, 2010 3:59 PM To: toasters@mathworks.com Subject: vseries pros and cons?
What do I loose if I put a NetApp 3140 gateway infront of an old DS4500 instead of getting a nice shiney 2040? (other than the hardware differences in the controllers that is). Are there limitations on what you can do with a v series box? Do you just zone LUNs to the v system and it formats them with WAFL?
Please be advised that this email may contain confidential information. If you are not the intended recipient, please notify us by email by replying to the sender and delete this message. The sender disclaims that the content of this email constitutes an offer to enter into, or the acceptance of, any agreement; provided that the foregoing does not invalidate the binding effect of any digital or other electronic reproduction of a manual signature that is included in any attachment.