You can also do two transition snapmirrors from the source (one to the new source and one to the new destination)
From: toasters-bounces@teaparty.net [mailto:toasters-bounces@teaparty.net] On Behalf Of Basil Sent: Tuesday, March 22, 2016 11:50 AM To: tmac tmacmd@gmail.com Cc: toasters@teaparty.net Subject: Re: Transition snapmirror to regular snapmirror
They talk about transitioning the target from the existing snapmirror, however this is going to work in my environment, I think.
Based on this doc, I think I will need to do a complete sync during the outage window.
Thanks :)
On Tuesday, 22 March 2016, tmac <tmacmd@gmail.commailto:tmacmd@gmail.com> wrote: Have you consulted this document yet?
https://library.netapp.com/ecmdocs/ECMP1609693/html/frameset.html
Should be instrumental in helping you out....
--tmac
Tim McCarthy, Principal Consultant
On Tue, Mar 22, 2016 at 12:25 PM, Basil <basilberntsen@gmail.comjavascript:_e(%7B%7D,'cvml','basilberntsen@gmail.com');> wrote: I am trying to migrate a replicated volume to CDOT, but I can't use 7mtt. My plan is to set up a transition snapmirror and do the cutover manually. I can't start the regular snapmirror of the CDOT transition snapmirror target, though. I get "Using a transition volume as a snapmirror source volume is not supported".
I have a long outage window, but would prefer to pre-seed the mirror of the new volume. What would you folks suggest?
_______________________________________________ Toasters mailing list Toasters@teaparty.netjavascript:_e(%7B%7D,'cvml','Toasters@teaparty.net'); http://www.teaparty.net/mailman/listinfo/toasters